Operation
Page EN-10
Before getting started
– Read the „Safety“ chapter from page EN-5.
– Set up and connect the appliance as de-
scribed in chapter „Start-up“ from page
EN-17.
Key tones
Each time you press one of the keys num-
bered (7) to (9) and (11) to (13), you will hear
a beep. This tells you that the appliance has
registered your keypress.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
The temperature indicator (10) will show
the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
Operation
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching on
• Press and hold the key (7) briefly.
A beep will sound.
The temperature indicator (10) will show
the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching off
• Press and hold the key (7) briefly.
The temperature indicator (10) will go out.
The compressor will not work and the ap-
pliance will stop cooling. The appliance is
switched off.
C
F
8.8.
8.8.
(13)
(12)
(11)
(10)
(9)
(8)
(7)
(7)
Wine refrigerator switch on/off
(8)
Switch light on/off
(9)
Select temperature zone
(top/bottom)
(10) Temperature indicator
The control panel
(11)
Increase temperature
(12)
Reduce temperature
(13)
C
F
Change temperature unit between
Celsius and Fahrenheit.
