Care and maintenance
Page 18
(13)
(14)
(15)
(16)
4. Only when replacing the charcoal filters:
The two activated charcoal filters (13)
are located to the right and left of the
motor (14).
Loosen the two activated charcoal
filters (13) and remove them.
5. Place the new activated charcoal
filters (13) on the left and right side of the
motor (14). Make sure that the studs (16)
are fitted properly in the grooves (15).
Lock the activated charcoal filters (13) in
place by turning them anticlockwise. Allow
the lock to click into place.
(9)
(10)
6. Place the grease filter (10) with the pins
into the openings.
7. Push the locks (9) up; snap the grease
filters (10) in and release the locks (9).
8. Switch the power back on.
9. Switch on the appliance again; then turn it
off as required.
10. Dispose of used activated charcoal fil-
ters (13) with household waste.