Start-up Seite EN-17
Start-up
Unpacking the
appliance
NOTICE
Risk of damage!
Improper handling of the
appliance may result in dam-
age.
■
Do not use sharp objects to
unpack the appliance.
1. Unpack the appliance.
2. Carefully remove all parts of the
packaging, plastic profiles, tape
and foam padding.
Mounting the wall
bracket
WARNING
Risk of injury!
Improper installation of the
appliance can lead to injury.
■
Before drilling the holes,
ensure that no wires or
cables (power, gas, wa-
ter etc.) will be damaged
(check with a line locator).
NOTICE
Risk of damage!
Improper handling of the
appliance may result in dam-
age.
■
Check the condition of the
wall before mounting the
wall bracket.
You should mount the wall bracket
before setting up the appliance.
Screws and wall plugs
You will need:
– 2 round-headed screws
– 2 suitable dowels
Tools and aids
You will need:
– Screwdriver
– Drill with drill bit suited to the
nature of the wall
– Measuring tape / ruler
– Level
– Pencil
The upper drill hole must
be at least 102 cm above
the ground.