Operation
Page EN-18
The kettle’s keep warm
function
There are two ways of starting the
keep warm function, which keeps
the water at the set temperature.
The keep warm temperature can
be set from 40°C to 95°C.
Start the keep warm
function during the heating
process
1. Press the button during the
heating process.
At this time, the desired keep
warm temperature can be set
by repeatedly pressing the
or button.
The display shows the select-
ed keep warm temperature
and the button flashes while
setting.
The button will stop flashing
after approx. 5 seconds and
the
and buttons will light
up permanently.
When the heating process is
completed, the kettle switches
to the keep warm function for
40 minutes. During this time
the kettle heats up at regular
intervals to the set keep warm
temperature.
If after 40 minutes no adjust-
ments have been made, the
kettle switches automatically to
standby mode.
2. To switch off the keep warm
function, press the or
button.
The lights of the and
buttons go out.
Starting the keep warm
function when in standby
mode
1. Press the button when in
standby mode.
2. Set the desired keep warm
temperature as described in
the previous section.
If the actual water temperature
is below the set value, the ket-
tle will heat the water until the
set value is reached. When the
heating process is completed,
the kettle switches to the keep
warm function for 40 minutes.
3. To switch off the keep warm
function, press the or
button.