Manual Disclaimer
This Manual and its instructions and information do not purport to cover all details or
variations in the gear unit and do not claim to provide for every possible contingency met
in connection with handling, installation, operation, or maintenance. Hansen Industrial
Transmissions nv does not make any representations, warranties or guarantees, express
or implied, as to the accuracy or completeness of the Manual. Users must be aware that
updates and amendments will be made from time to time to the Manual. It is the user’s
responsibility to determine whether there have been any such updates or amendments.
Neither Hansen Industrial Transmissions nv nor any of its directors, officers, employees
or agents shall be liable in contract, tort or in any other manner whatsoever to any person
for any loss, damage, injury, liability, cost or expense of any nature, including without
limitation incidental, special, direct or consequential damages arising out of or in
connection with the use of the Manual. The user and/or purchaser bears all risks. Should
further information be desired or should particular problems arise which are not covered
sufficiently for the users’ and/or purchaser’s purposes, the matter should be referred to in
writing to Hansen Industrial Transmissions nv.
Warning: Read and understand all instructions and information prior to any
handling including maintenance, installing or starting the gear unit. Failure to
follow instructions could lead to damage, serious injury, or death.
• Only qualified and trained personnel should be involved with the storage (including
transport), commissioning, operation, installation (including removal), inspection,
maintenance and repairs of this gear unit.
• Make sure all your personnel, operators of this gear unit have been professionally and
adequately trained for safe working practices.
• Operators must wear adequate personal protective equipment.
• Ensure all international, EU, national and local safety regulations and codes are
followed when handling, maintaining, installing (including all related actions) the gear
unit.
• Verify the compatibility of the gear unit with the installation it is meant for.
2
Manual Disclaimer
IM_405_002_EN
9
