16
-
23
Hanskamp AgroTech B.V. (the Netherlands)
www.hanskamp.nl/en
Dump
EN
Carrousel voersysteem—Carousel feeding system—Karussel
-
Fütterungssystem—Système d
’
alimentation carrousel
4.
FAQ
Occuring problem:
Possible cause
Solution
There is no feed.
No feed in stock pipe.
Check auger and silo
Motor is not controlled by the controller.
Take of the cover at the motor and check
the indicator lights on the PCB.
Check supply and control (voltage)
Check if the rotor spins. Connection piece
between the motor and valve could be
broken.
Remove motor of rotor and reinsert.
Constipation by, for example wood or
plastic.
Remove the Dump off the wall and shake it
empty. The rotor can be rotated by hand
when it is empty.
Dump isn
’
t anti spill.
Dump isn
’
t set.
For set up see page 9
Dump doesn
’
t distribute the
proper amount.
Calibration is incorrect.
Calibrate the controller
