background image

 

12 - 20

 

Hanskamp AgroTech B.V. (the Netherlands) 

www.hanskamp.nl/en

 

 

Pipefeeder 

EN 

24VAC & 12

-

24VDC 

Warranty limitations 

The warranty excludes costs and expenses due to: 

 

Incorrect use of the equipment, not in accordance with the specifications in the 
instructions for installation and use;

 

 

The consequences of any interventions by engineers other than engineers recog-
nised and approved by Hanskamp for carrying out service, maintenance and other 
technical work; 

 

 

Incidents such as freezing, ice, fire, flooding, inundation or any other form of ex-
treme water damage, and lightening;

 

 

Defects in the electrical system or earthing system;

 

 

Damage to the electrical system caused by vermin and so forth.

 

 

The warranty is not applicable to consequential damage that is not related to the feed 
station itself. All systems have been tested. However, in the event of faults, Hanskamp 
cannot be held responsible for consequential damage. 

 
List of included amendments in these installation and operating instructions: 

 

 

 

Copyright and disclaimer 

The information given in this publication is provided for information purposes only and does not constitute an offer for sale. The products supplied may 
differ from those illustrated. No part of this publication may be reproduced or made public without prior permission in writing from Hanskamp AgroTech 
BV. Although this publication was put together with the utmost care, Hanskamp AgroTech is not liable for any damage that might arise due to errors or 
gaps in this publication. 
The instructions for installation and use in Dutch are the original instructions for installation and use. The translations into other languages have used the 
Dutch instructions for installation and use as the source document. Hanskamp AgroTech does not accept any liability for differences between the trans-
lations. If there are doubts about the content and accuracy of the translated instructions for installation and use, the Dutch instructions for installation 
and use constitute the authoritative document. 

Nr.

 

Release date

 

Chapter(s)

 

Comments

 

1

 

06/2012

 

All

 

First release

 

1.1

 

01/2013

 

Installation

 

Addition DosPrint

 

2.0

 

10/2013

 

All

 

Up-to-date for Versie 2.

 

2.1

 

06/2014

 

All

 

Update to standard for 2014

 

2.2 

08/2014 

All 

New name and logo added 

Summary of Contents for PipeFeeder





















Reviews: