6
2. First Use of HANNS PAD
2.1 Battery management and charging
Before the first use of the HANNS PAD, please fully charge the battery:
Insert the charger / adapter into the DC jack to charge the battery.
For the first two times of charging battery, the charging time shall be some 10 hours; and later the
charging time is some 5 hours.
This product adopts a built-in polymer battery; you must use the dedicated charger to charge the
product.
During charging, the battery icon on the screen will scroll.
When charging is complete, the battery icon will turn green and stop scrolling.
In order to prolong the service life of the product, run it until the battery is depleted before the first two
times of charging battery.
When the product is not in using, be sure to turn off the power switch on the product.
If you will not be used for a long time, be sure to discharge and then charge the battery once a month.
When you plug in the charger after the product shuts down due to low power, it may take a while
before the product enters the home screen.
Built-in polymer battery must be recharged regularly. Battery damage caused by depletion is not
covered by warranty, like damage caused by using of unauthorized charger.
2.2 Turn on/off HANNS PAD
Press and hold
button to turn on/off the HANNS PAD. See Device Description.
2.3 Connected to the PC
Using the supplied USB cable to connect the product to PC, you can transfer data or power the product
via. Entering the USB disk mode, you can copy, delete files in the player on the PC.
3. Device Operation Interface
3.1 Home screen description
The product enters the home screen after booting. The screen is locked by default. Drag the "XXXX"
key to unlock it.