DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3
51
[Decode]
Switch the decoding function.
[Label position]
The position where the decoded data is drawn on the screen (only
available when the decode function is turned on).
[Table]
Data recording mode.
Trigger level knob: The analog channel can modify the trigger level value. Trigger the
mark and move up and down with the knob.
Digital channel: You can change the trigger threshold of the digital channel by setting
the threshold voltage.
Trigger setting 1:
Data source: CH3; Baud rate: 19200; When: Start; Idle level: High; Parity: None; Data
bits: 8. Adjust the trigger level. The trigger result is displayed as follows:
Trigger setting 2:
Data source: CH3; Baud rate: 19200; When: Data; Idle level: High; Parity: None; Data
bits: 8; Data: 0 × 55. Adjust the trigger level. The trigger result is displayed as follows:
