DSO8000 SERIES
Chapter 8: Appendix
Appendix A: Accessories
1) Probe×2 (1.2m), 1:1, (10:1) Passive Probes
2) A Power Adapter that fits the standard of destination country
3) A User’s Guide
4) A User Registration Form
5) A User Warranty Card
6) A Software CD
Appendix B: Warranty
Hantek warrant its products’ mainframe and accessories in materials within the warranty
period. During the period concerned,Hantek guarantees the free replacement or repair of
products which are approved defective.
To get repair service or obtain a copy of the whole warranty statement, please contact
with your nearest sales and service office.
Hantek does not provide any other warranty items except the one being provided by this
summary and the warranty statement. The warranty items include but not being sub-
jected to the hinted guarantee items related to tradable characteristic and any particular
purpose.
Hantek will not take any responsibility in cases regarding to indirect, particular and ensu
-
ing damage.
Appendix C: Maintenance
General Care
Do not store or leave the instrument in where the LCD display will be exposed to direct
sunlight for long periods of time.
Caution
: To avoid damage to the instrument or probes, do not expose them to sprays,
liquids, or solvents.
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean it with
a mild detergent and water. Make sure the instrument is completely dry before recon-
necting it to a power source.
To clean the exterior surface, perform the following steps:
1) Remove loose dust on the outside of the instrument and probes with a lint- free cloth.
Take care to avoid scratching the clear plastic display filter.
2) Use a soft cloth dampened with water to clean the instrument.
Notice:
To avoid damage to the surface of the instrument or probes, do not use any
abrasive or chemical cleaning agents.
Storage of Scope meter
