DSO8000 SERIES
center.
Horizontal position changes the displayed waveform position, relative to the trigger point.
Press HORI button to show the horizontal system menu. The settings of this menu are
listed in the following table.
The Horizontal Menu
Figure 2-20 The Horizontal menu
The Horizontal Menu Table
Menu
Setting
Description
Time base
Y – T
X – Y
Roll
Show the relative relation between vertical voltage and
horizontal time.
Show CH1 value at X axis; CH2 value at Y axis.
In Roll Mode, the waveform display updates from right to
left.
Reset
Pressing this button clears trigger offset and moves the
trigger point to the horizontal center of the screen.
ALT Mag
ON
OFF
Turn on ALT Mag
Turn off ALT Mag
Holdoff
ON
OFF
Turn on the Holdoff time
Turn off the Holdoff time
1. TIME/DIV
Use this button to select the horizontal time/div (scale factor) for the main.
Figure 2-21 The TIME/DIV button
2. POSITION
Press this button to adjust the horizontal position of all channel waveforms. The
resolution of this control varies with the time base.
Figure 2-22 The POSITION button
