8060
■ Connect and Disconnect Properly.
Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
■ Connect and Disconnect Properly.
Connect the probe output to the
measurement device before connecting the probe to the circuit under test. Disconnect
the probe input and the probe reference lead from the circuit under test before
disconnecting the probe from the measurement device.
■ Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
■ Use Proper Probe.
To avoid shock hazard, use a properly rated probe for your
measurement.
■ Avoid Circuit or Wire Exposure.
Do not touch exposed connections and
components when power is on.
■ Do Not Operate With Suspected Failures.
If suspected damage occurs with the
device, have it inspected by qualified service personnel before further operations.
■ Provide Proper Ventilation.
Refer to the installation instructions for proper
ventilation of the device.
■ Do not operate in Wet/Damp Conditions.
■ Do not operate in an Explosive Atmosphere.
■ Keep Product Surfaces Clean and Dry.
Digital Scope Meters
DSO8000 Series
digital scope meters offer exceptional waveform viewing and
measurements in a compact, lightweight package. DSO8000 series is ideal for
production test, field service, research, design, education and training involving
applications of analog circuit tests and troubleshooting.
Product features:
■ Dual Channel, Bandwidth:
60MHz
■ Maximum real-time sampling rate:
2
50MSa/s
