Section 3: Programming
Operator Manual
1700w™
(Rev 1)
© Hantle 2010
3.23
3.4.3 OPTIONAL FEATURES
The 1700w™ ATM offers several optional functions to improve performance and keep
the ATM functional in the event of a paper problem (jam, out of paper etc.)
LOCATION NAME
Adding a name to this location will print the name entered onto the journal records
and print all setup. This is purely a convenience option and is not required.
SELECT RECEIPT
This feature allows the ATM to complete transactions even though it may not be able
to dispense a receipt. If the ATM experiences a paper jam, or runs out of paper, the
customer will be asked if they would like to complete the transaction even though
they will not receive a receipt. If the customer answers Yes, the transaction will
continue. Following the transaction the customer’s information (what would have
appeared on the receipt) will display on the screen. The ATM will continue to operate
without use of the printer until someone accesses the Operator Function menu. At
that time the error must be corrected before the ATM will go back into service.
To enable the option, press Select Receipt, the lower portion of the screen will
display the options status.
TRANSFER TO CREDIT
Some networks do not allow customers to transfer funds to or from their credit
cards. By enabling / disabling this option you will add or remove the option button
from the customer menus. Check with your Distributor / Processor as to whether or
not they support fund transfer to or from credit cards. NOTE: If your network does
not support such transfers and you leave the option enabled, the customer can
choose it from the menu however the network will not authorize the transaction.
CHECK BALANCE
Enabling this option will ask each customer if they would like to check their balance
before each transaction.
