Section 3: Programming
Operator Manual
C
4000™
(Rev 1)
© Hantle 2010
3.5
3.2 HOST SETUP
The Host Setup menu provides access to the parameters necessary to connect the
ATM to the processor. Master Password is required to access most of these options;
however Service password allows basic access for troubleshooting purposes.
3.2.1 KEY MANAGEMENT
Access to Key Management requires entering a “Secure Mode” which engages
additional security measures (per VISA/PCI specification) to prevent Master Key
tampering. Make note of these changes as it does affect how keys are entered.
Entering Key Management requires two 6-digit passwords. By default these will be
“000000” for part #1 and “000000” for part #2.
If a mistake is made entering the “Secure Mode” password, you will be prompted to
wait 30 seconds to reattempt.
NOTE:
In compliance with PCI specifications,
you must change the Secure Mode
Passwords from default before any Master Keys can be entered
. After
changing the Secure Mode Passwords, you must exit completely from the Operator
Menu, and reboot the machine. After this step, you can enter Master Keys.
