P
RECAUTIONS
2
shortening the use life of device;
17. Prevent injury to jammed fingers when adjusting the
bracket;
18. Please set the reasonable resolution to protect eyes.
z
Do not cover the holes on the outer case in case of
overheating of the device.
NOTE: Please confirm the voltage of electricity supply before
powering on the device.
z
Do not step or place anything on the Power Cord.
z
Refer all maintenance, upgrades, and servicing to qualified
service personnel, to reduce the risk of electric shock or
damage to the equipment.
z
Do not place the device in too hot or too cold environment.
Avoid dropping, liquid splashed and removing the outer shell of
the device. If the device is damaged by the above activities,
the original maintenance guarantee will be ineffective.
Please pay great attention to all notes and warnings about the device.
Note:
z
The device should be checked by the qualified technical personnel if one
of the following cases occurred:
a.
The power plugs or Power Cord is damaged.
b.
There is liquid influenced or flown into the device.
c.
The device was placed into a high humidity environment for
long-term.
d.
The device does not work even it is properly used.
e.
The device is fallen down or damaged.
f.
The device is obviously damaged.
z
Do not place the device in sharp-change temperature (below 0
℃
or
above 50
℃
) environment.
z
Please use the qualified Power Cord recommended by manufacturer.
Please follow all precautions and instructions in this manual, the symbol
“
” on the device and this manual indicates “Dangerous”.
