Active Test
1.
Install a mouthpiece.
2.
Long press the right side button [
] to power on and go
through preheat process.
3.
After preheat ends, click ‘Alcohol Measurement’ and press
‘Test’
4.
The subject shall take a deep breath and then blow into the
mouthpiece via air intake hole continuously for 4 seconds
until the device gives out one beep sound that is the sign to
stop blowing, and the breath sample has been collected for
analyzing, result will be coming out shortly.
5.
Click ‘Next’ to an interface that needs fill information like
License No, etc.
6.
Once all information is filled. It’s optional to take on-site
photo. Then, click ‘Confirm’ entering result summary page,
print it if necessary.
Passive Test
When subject is not able to take the initiative to conduct normal
breath alcohol detection, the device allows to collect the breath
of the subject through passively to complete the test, and give
