BX176 portable single gas detector operation manual
17
detector will power off automatically.
Note
: For High alarm adjusting range please refer to attached
list 1.
5. Charge the battery
When the detector indicates low voltage or the detector
automaticaly power off due to undervoltage, please charge the
battery for the detector in time
：
after the detector is power off,
connect the charger plug to the detector’s charging jack, and then
connect the AC adaptor to AC220V electricity power source, the
detector will show charging status. After the battery indicator icon
in the screen is full and doesn’t change any more, the charging is
completed and you can pull the plug out.
Warning
:
1. When the detector is power off, If you charge the detector,
you cannot turn on the detector for detecting.
2. Please do not charge the detector in detecting work spot
since spark maybe generated when your plug the charger, which
is dangerous;
3. Please do not charge the detector when detector is power on,
the charging may take more time.
6. Data communication (Optional)
Note
：
To realize this function, one CD and communication cable
must be equipped together with your purchased detector.
Summary of Contents for BX176
Page 24: ......
