Single Port KVM over IP
read-only mode and would not allow you to write any information on this
drive but copying only. This drive would be bootable under DOS mode if
the motherboard/BIOS on the host computer supports USB BOOTABLE
function. For emulating DVD Drive, please use Drive Redirection
function.
Note: The above information has to be given from the point of view of
IP-KVM with correct IP address and device name. Administrative
permission is required as regular user may not have the right to access.
Please login as a system administrator (or as “root” on UNIX systems).
The following information has to be given to mount the image properly:
Share host -- The server name or its IP address.
Share folder name -- The name of the share folder to be used.
Image file name -- The name of the image file on the share folder.
User name -- If necessary, specify the user name for the share named in
advance. If unspecified, and a guest account is activated,
this guest account information will be used as your login.
Password -- If necessary, specify the password for the given user name.
To register the specified file image and its location click on the button
“Set”.
The specified image file is supposed to be accessible from the IP-KVM. The
information above has to be given from the point of view of the IP-KVM. It
is important to specify correct IP addresses, and device names. Otherwise,
IP-KVM may not be able to access the referenced image file.
Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not
have these permissions. You should either login as a system administrator
(or as “root” on UNIX systems), or ask your system administrator for help
to complete this task.
49 / 109
