Single Port KVM over IP
IP auto configuration
With this option you can control if the IP-KVM should fetch its network
settings from a DHCP or BOOTP server. For DHCP, select “dhcp” , and
for BOOTP select “bootp” accordingly. If you choose “none” then IP auto
configuration is disabled.
Preferred host name
Preferred host name to request from DHCP server. Whether the DHCP
server takes the IP-KVM suggestion into account or not depends on the
server configuration.
IP address
IP address in the usual dot notation.
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the IP-KVM should be accessible from networks other than the
local one, this IP address must be set to the local network router's IP
address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This
option may be left empty, however the IP-KVM will not be able to
perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will
be used in case the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the IP-KVM's Remote Console server and HTTPS
server are listening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM's HTTP server is listening. If left
empty the default value will be used.
Telnet port
Port number at which the IP-KVM's Telnet server is listening. If left
empty the default value will be used.
75 / 109
