Single Port KVM over IP
IP-Power (Power Control Settings)
For controlling Serial Power Controller.
4.5.6
Date / Time
Figure 4-27 Date / Time
This link refers to a page, where the internal real-time clock of the IP-KVM
can be set up. You have the possibility to adjust the clock manually, or to
use a NTP timeserver. Without a timeserver, your time setting will not be
persistent, so you have to adjust it again, after IP-KVM loses power for
more than a few minutes. To avoid this, you can use a NTP timeserver,
which sets up the internal clock automatically to the current UTC time.
Because NTP server time is always UTC, there is a setting that allows you
to set up a static offset to get your local time.
Warning
There is currently no way to adjust the daylight saving time
automatically. So you have to set up the UTC offset twice a year
properly to the local rules of your country.
88 / 109
