background image

CERTIFICATIOnS

International Product Safety Certifications

TÜV, CE, UL, and Safety Class II certifications ensure that Hanwha Solar’s 
products operate safely and comply with electrical and fire safety codes 
around the world.

International Product Performance Certifications

IEC Certification ensures our products’ performance and reliability.

International Quality Manufacturing Certifications

ISO 9001, OHSAS 18001, and TÜV factory inspections confirm that 
Hanwha Solar’s manufacturing is carried out under proven quality 
control and manufacturing processes.

Environmentally Responsible Manufacturing

ISO 14001 Certification and PV Cycle membership ensures that Hanwha
SolarOne’s manufacturing is performed with respect for the environment.

www.hanwha-solarone.com

INTERNATIONAL OFFICES

hanwha solarone Co., Ltd.

No. 888, Linyang Road, Qidong
Jiangsu Province, 226200, China
Phone: 86-513-8360-6222
Fax: 86-513-8360-6278

hanwha solarone gmbh

Headquarter Sales EA-Germany
Oskar Messter Straße 13
85737 Ismaning, Germany
Tel: 49-89-2175-667-30
Fax: 49-89-2175-667-399

representative office-Italy

Via Santa Maria Valle 3
20123 Milan, Italy
Tel: 39-02-00681-281
Fax: 39 02 00681-400

representative office-france

21 Avenue Le Corbusier
59042 Lille cedex, France
Tel: 33-359-811-751
Fax: 49-89-2175-667-399

representative office-spain

Notari Badia, n4-Local 11
08221 Terrassa, Barcelona, Spain
Tel: 34-931-93-97-63
Fax: 34-901-70-66-22

hanwha solarone Usa

2424 Walsh Avenue,
Santa Clara, CA 95051
8001 Irvine Center Drive, Suite 1250
Irvine, CA 92618
Tel: 1-714-689-6868
Fax: 1-714-689-6868

For more information, and to contact
local sales or after-sales technical support,
please visit our website at:

www.hanwha-solarone.com

©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice.

Release: 2013-04-10     HW3.819.183SCV1

Summary of Contents for HSL60P6-PB-0-xxxT Series













Reviews: