background image

using speaker mode

46_

 using speaker mode

 

  For the IP audio module (SPA-D1000), the Equalizer menu is provided so that its sound can be properly 

adjusted according to the characteristics of the connected analog speaker. 
The Equalizer menu is not provided as the DSP optimal value is reflected for each speaker model.

 

~

Parametric Equalizer (PEQ) 

 

- Flat: Resets the set PEQ value. 

 

- Type: Provides 8-band peaking type. 

 

- Gain: Controls the output value for each band. (input value -12~+12, increments of 1.0)

 

- FREQ: The frequency band values, which are provided for each BAND, are displayed.

 

- PRESET: Saves or loads PEQ set values to apply them.

Scheduler

A broadcast reservation can be set.
Broadcast sound sources can be broadcast through the speaker alone by directly entering sound files (mp3, 
wav) registered in Source File Management or TTS phrases.
It is possible to create daily, weekly, monthly, and annual loop schedules, and it will not broadcast on days set 
as holidays.

1. 

On the Home screen, click <

Operation Setting

 

<

Scheduler

>.

 

~

Registered schedules can be viewed by month/week/day/year.

2. 

The scheduler’s additional functions can be used.

 

~

Stop: The currently playing broadcast will stop.

 

~

Holiday: Holidays can be set.

 

~

Download: Registered schedules can be downloaded as “xml” files.

 

~

Upload:   A downloaded schedule can be uploaded to other speakers.   

If there are both weekday and holiday schedules, the holiday schedule will not be reflected even 
if you upload a downloaded file.  
For holiday schedules, use the download and upload functions of the <

Holiday

> menu.

 

~

Copy:  Schedules for each month can be copied. 

When the Copy Settings window appears, click the [

Copy

] button. 

The selected year automatically resets to the fifth year from the pertinent year.

 

~

 : Renews a schedule list.

3. 

Schedules registered on each date are shown, and if you select a date where you want to create a 
schedule, the schedule setting screen will appear.

 

M

 

`

If you register 4 or more schedules for one day, it will be indicated as <

+2

>. 

Summary of Contents for SPA-C100W





















































Reviews: