using speaker mode
48_
using speaker mode
~
Repeat Option (Extension): Sets the set schedule to repeat on a weekly, monthly, or yearly basis.
M
`
If you set up the <
Once
> or <
Everyday
> function, check that the set schedule is accurate on the [
Weekly Calendar
],
[
Daily Calendar
] screen.
`
When setting the <
Repeat Option (Extension)
>, the schedule period should not exceed one week for <
Week
>, 28 days
for <
Month
>, or 365 days for <
Year
>.
`
For <
Week
>, a schedule is set every week from the selected day of the week.
`
For <
Month
> and <
Year
>, if you select a specific day, the schedule is set on the specific date for every month or year.
`
If you specify a date range in <
Month
> or <
Year
> and select days of the week in [
Everyday
], the schedule is set only
for those days of the week which exist within the date range.
`
You can delete a specific day from the schedule date range or delete all recurring events.
4.
Source: The <
local
>, IP address are displayed as <
127.0.0.1
>.
5.
Zone: Not displayed in <
Speaker
> mode.
6.
Source sound: Select an audio source type to be broadcast from schedules.
~
MP3 Play: Displays a list of audio sources registered in BGM Play.
The length of the selected audio will automatically be reflected to the end time of <Date &
Time> and displayed as being deactivated.
If you input the <
Number of Repeats
>, an audio source will play repeatedly and automatically
displayed at the end time.
If you uncheck <
Source full-time playback
>, you can directly enter the end time so that it is
broadcast only at the time you want.
The playing order of the audio can be changed using the [
] button for each file.
M
`
If the date is 2021-01-01 / 2021-01-01, the time starts at 23:55, and the length of the selected audio source is 10
minutes, the end date and end time will be set to 2021-01-02 and 24:05 automatically.
If it is set to <
Once
>, the broadcast schedule is set from 23:55 on January 1st to 0:05 on January 2nd continuously.
If it is set to <
Everyday
>, the continuous broadcast schedule is set twice from 23:55 on January 1st to 0:05 on January
2nd and from 23:55 on January 2nd to 0:05 on January 3rd.
~
TTS: Enter sentences with the language to be used in the <
Text for TTS
> and select the language and
gender in Select Speaker.
- Select language: English (United States, United Kingdom), German, Spanish, French, and Russian
are supported.
- Select gender: You can select a male or female voice.
- TTS input language and the language the speaker has chosen should be the same to play TTS-
converted audio normally.
If they are not the same, there will be a pop-up window that says <
A TTS conversion error has
occurred. Please check the contents.
>
- When you enter a special character, please refer to the following content.
`
In the TTS input window, you cannot enter
&
or
`
.
`
You can enter
^ ( ) _ | ‘ “
, but they are not converted to audio.
`
If
@ # $ % = \ / *
are located alone or in the middle of sentence or numbers, they will be converted to audio.
`
Depending on the supported language or sentence structure, a special character may not be converted to audio.
7.
ETC.: You can set other settings of the schedule.
~
Priority: A lower number has a higher priority. If the priority is “1501”, it will be on air prior to any other
broadcasts.
As the priority of a general audio broadcast is set to 3000 by default, the priority of the
Scheduler is recommended to be set at a value lower than 3000. (The initial value is 3000, the
input value is 1501 - 9999)
~
Volume: You can set the volume when the schedule is operated. (Initial value 70, input value 0~100)
Output volume is reflected only to <
Scheduler
>.
~
Date Format: You can select the date format displayed on the scheduler.
~
Title Color: You can select the color displayed on the scheduler.
M
`
If the Controller Mode or source speaker is turned off during the scheduled broadcast and then turned on within the
scheduled broadcast time, it automatically plays the first sound source among the selected sources and stops at the
scheduled end time.
`
If the zone speaker is rebooted during scheduled broadcasting, the sound source is skipped and plays, and then stops
when it reaches the scheduled end time.
`
If the speaker is turned off and then turned on after the scheduled broadcast time has passed, the scheduled broadcast
does not resume.
Summary of Contents for SPA-C100W
Page 52: ......
