background image

English _

13

 

!

ENVIRONMENT SETTINGS

Unlock Account

For all accounts except the admin account, if you enter the wrong password more than 5 times when logging 
in, the account will be locked for 30 seconds and you will not be able to log in. 
The admin account can reset the number of retries by checking the number of login retries for each account 
and whether the account is locked.

1. 

On the Home screen, click 

<Environment Setting>

 

;

 

<System Management>

.

2. 

Click 

[Reset]

 after checking the locked account on 

<Account lock status>

 The lock icon is changed to 

unlocked and the number of retries for the account is reset.

Setting the System Check Time

Sets the time for the system check. The system reboots automatically at the set time every day. 

1. 

On the Home screen, click 

<Environment Setting>

 

;

 

<System Management>

.

2. 

Set the time to start checking in 

<System Check Settings>

3. 

Click 

[Apply] 

after clicking the [ 

 ] button of 

<Operation>

.

4. 

The system will be checked and be rebooted at the set time; it will take approximately 5 minutes.

Summary of Contents for SPA-S1000


































Reviews: