Hanwha Vision SPA-S1000, User Manual

use audio server

22_

 use audio server

~

Transmission Method:  If you select UNICAST, <

Trans IP

> will be deactivated, and the device’s IP 

address will be used.  You can enter the <Port> number in the input window 
automatically or manually, and it should not overlap with another device.  
If you select MULTICAST, a MultiCast IP address (e.g., 224.124.0.

*

) and <

Port

> 

number are automatically allocated to the <

Trans IP

>.   

If you enter the IP address and port directly in the device, be cautious that it does 
not overlap with automatically assigned information.  

- UNICAST : Up to 20 broadcasts are possible with the UNICAST network.

- MULTICAST :  In a MULTICAST network, you can simultaneously broadcast to up to 512 devices 

(when the control mode is set to UDP).

M

`

The maximum broadcasting count can change depending on the setup of <

Operate

> 

;

 <

Control Mode

>.

`

You have to select <

Transmission Method

> in consideration of the network environment being used.  

`

The maximum broadcasting count may be limited depending on the network environment's configuration.

~

CTRL:  The CTRL box should be checked to activate the <

Source Control

> window of the source 

Device in <

Operate

> 

;

 <

Button Mode

>.

- To use it as the sound audio device in the <

System Setting

> 

;

 <

Annual Scheduler

>, the CTRL 

box should be deactivated. 

~

CTRL IP :  The device List for remote control is provided in the <

Button Mode

>, so select the same IP 

as the registered device.  

~

Device Name: Displays the name of a control device.

~

CTRL Type :  If you set a source type as <

BGM

>, select <

file_player

>, and if you set a source type as 

<

TTS

>, select <

tts_player

>.

~

I/O CH :  If you set a <

CTLR Type

> as <

file_player

>, “

1

” will be displayed, and if you set as <

tts_player

>, “

2

” 

will be displayed.

~

Icon:  Selects an icon (BGM or TTS) and color of a source. 

If <

User Icon

> images are directly uploaded on PC, you can select one from the <

Icon

> list. 

3. 

Once set, click the [

Apply

] button. 

4. 

If you click the 

[View Settings]

 button, the set value can be saved as a CSV file.

M

`

You can use the <

Controller

> mode speaker as the zone device after performing <

Device Registration

> as with other 

speakers.

`

You should not use the <

Controller

> mode speaker and audio server (SPA-S1000) simultaneously in the same network.  

If a speaker and microphone are repeatedly registered, the device may not be controllable. 

Register Source Device

Speakers can be registered as source devices for broadcasts. <

Source

> means one speaker set as a 

source device.

1. 

On the Home screen, click 

<System Setting>

;

<Source Registration>

.

2. 

Select 

<Source Registration>

 and set the following items:

~

Source ID: Up to 24 source devices can be registered while the registered count is displayed.   
Click the 

[+]

 icon to create a list, and click the 

[ - ]

 icon to remove the list. 

Names such as s1, s2, and s3 are displayed on the website menu. 

~

IP address:  An IP address of speakers to be used as a source. If you select an IP address, Model Name, 

Device Name, and Device Location will be displayed.

~

Priority:  The user prioritizes sources. The smaller the number is, the higher its priority is. 

(Initial value 3000, input value 1000~9999)

M

`

While broadcasting by selecting either source speakers (with 3000 source registration priority) or zone speakers in <

Button 

Mode

>, if a schedule time of an event priority is set as "2000" in the <

Annual Scheduler

> comes up, the <

Button Mode

> 

broadcast will stop and the schedule broadcast will start. 
Conversely, if you select a speaker that a priority of a source speaker is "1000" in <

Button Mode

> and broadcast, the 

<

Button Mode

> broadcast will be kept since the schedule priority in <

Annual Scheduler

> is higher.

~

Source Name: Inputs or changes the name of a source.

~

Source Type: Selects BGM or TTS.

~

CH & Name:  If you select BGM, 1 BGM will be shown. If you select TTS, 2 TTS will be shown.