background image

Caution

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) 

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC 
SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF 
IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE 
ACCOMPANYING THE APPLIANCE.

Important Safety Instructions

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Clean only with dry cloth.

6. 

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7. 

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including 
amplifiers) that produce heat.

8. 

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 
two blades with one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong is provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9. 

 Protect the power cord from being walked on or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the apparatus.

10. 

 Only use attachments/accessories specified by the manufacturer. 
 Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the 
apparatus.

11. 

 Unplug this apparatus when a card is used. Use caution when moving the cart/ 
apparatus combination to avoid injury from tip-over.   
Refer all servicing to qualified service personnel. Servicing is required when the 
apparatus has been damaged in any way, such as powersupply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO 
CONDITIONS :
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2)  THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED 

OPERATION.

Caution

 

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS 
A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO 
PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIP-
MENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.  
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF 
NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE 
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A 
RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER 
WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Summary of Contents for Wisenet SPI-50













Reviews: