Step 3 - Drive Tray Prep
●
Open the front bezel door to gain access to the Hard Drives.
● Press the Blue button on the drive latch upward and the Drive Tray handle will pop out.
● The drive tray can be slid out of the unit now.
●
Remove the plastic drive blank.
● Pull the two tabs away from the outside of the drive tray to release the drive blank.
Step 4 - Install Hard Drive
●
Prepare the Drive Tray, Drive, and (4) Screws
●
The drive will fit into the drive tray.
●
Use the (4) hard drive screws to secure the drive to the drive tray
● (2) hard drive screws per side of the drive.
© 2019
Page 2 of 3
