12
7. LIST OF SETUP ITEMS
AT.M
AT
1.P
P4Gr
1.I
1.D
1.M R
2.P
2.I
2.D
2.MR
3.P
3. I
3. D
3.MR
4.P
4.I
4.D
4.MR
AR
PID
FUZY
TMU
WTH
PWR.S
A1TY
A1DB
AL-1
A2TY
A2DB
AL-2
HYS
PR-S
BPS
PRI
ST P
DLN
ADR
RP.T
OUT
O.ACT
CT
PO
OL-H
OL-L
FR-L
INP
FR-H
DP-P
SL-H
SL-L
RJC
FILT
BIAS
B.OUT
P.E1
P.E2
RET
RET.H
RET.L
P1Gr
P2Gr
P3Gr
NP100
WZ
PID≠OFF
Caution
- Preparation must be carried out in engineering mode when operating the controller.
- There are setup mode for input and output functions and setup mode for control
function in engineering mode but must start with the setup of the input and output
functions.
※ Remain time of segment is
indicated in running
【Operation indicator mode】
【Engineering mode】
Power
(ON)
Process value
Set value
Process value
Output value
Display remain
time of segment
+ 2.5 sec.
or
PID=OFF
※Displayed in running condition
Caution
1) When control setup group recovers from a power failure, it resets if selected 〞COOL〟 from the
control mode but keeps operating the program just before the power failure if 〞HOT〟 is selected.
2) When power turns on from its OFF mode in manual operation condition, it operates in the output of the
manual operation condition if “HOT” is selected from the motion mode at the time of power recovery of
the control setup group.
Operation when power is on.
