4
█ Panel cutouts
█ ON Setting time
█ OFF Setting time
█ Default setting
Names of each part
Connection diagrams
Setting times
[Unit : mm]
1 ON time
displaying unit
Display ON set time and elapsed time
2 OFF time
displaying unit
Display OFF set time and elapsed time
3 ON time setting
incremental key
Pressing the key will increase the ON time set value
4 ON time setting
decremental key
Pressing the key will decrease the ON time set value
5 LOCK Key
Use the key when setting the lock.
If you press the LOCK key and hold for 3 seconds, the key
becomes locked, or the locked status of the key is released
6 OFF time setting
incremental key
Pressing the key will increase the OFF time set value
7 OFF time setting
decremental key
Pressing the key will decrease the OFF time set value
8 ON output
displaying lamp
Turns on when relay output turns ON
9 OFF output
displaying lamp
Turns on when relay output turns OFF
10 STA output
displaying lamp
Turns on when START signal is input
Maximum setting time
Setting time range
9999 s
0 ~ 9999 s
Maximum setting time
Setting time range
9999 s
0 ~ 9999 s
ON time
OFF time
10 s
5 s
Since the rise and fall time of internal power and external output power is 100 ms
after power on and 200 ms after power off, it does not not operate in unstable time to
prevent malfunction due to unsafe output operation of external sensor
• Apply the signal 100 ms after power on.
• Apply power 200 ms after power off.
※ T : 1s, Ton : ON set time, Toff : OFF set time
Input connections
Operation time chart
█ Non voltage input (When sensor is NPN voltage output)
█ Non voltage input (When sensor is open collector output)
█ Voltage input
Power
