HappyJapan HCS3 Instruction Book Download

Page: 206 / 364

-S3 -97

18-8

OTHER SETTINGS

User maintenance mode

User maintenance mode has 7 items as below. Indicates point which sensors are active.

18_8 V401

Conditions

L point sensor

The point that indicator becomes RED is L-point, when upper shaft is turned.

C point sensor

The point that indicator becomes RED is C-point, when upper shaft is turned.

Needle sensor

The point that indicator becomes RED is needle position, when moving head is
moved.

Origin point of cutter

The point that indicator becomes RED is origin point of cutter.

Origin point of thread catcher

The point that indicator becomes RED is origin point of thread catcher.

Angle

Indicate angle of upper shaft.
In addition, directly enter the angle when you press

, the upper shaft can be turned to any

angle.
Please use dial when you need to know precision angle.

Key

Machine movement

Change jump

Change the needle bar’s movement.
“JUMP” : Needle Jump, “DRIVE” : Needle Drive

Upper shaft turns

Upper shaft turns clockwise and counterclockwise.
When release key, upper shaft stops.

Caution: please be careful that Needle move at once.

Needle change

Move the sewing head to the adjustment needle in the direction of the arrows.

Cutter Open/Close

When cutter is open position, cutter move to close position.
When cutter is close position, cutter move to open position.

Caution: please be careful that cutter move at once.

Catcher Open/Close

When catcher is open position, cutter move to close position.
When catcher is close position, cutter move to open position.

Keeper

When keeper is open position, keeper move to close position.
When keeper is close position, keeper move to open position.

Standby position

In case, each equipment position without standby position, as example “Upper
shaft is not at C point, Thread cut blade is not at stop position, Thread Catcher
is open position”, this key work for back to standby position automatically.

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands