background image

WARRANTY

Have a question about service, warranty or parts?

Call 

888-286-1809 

(Toll Free)

 

2 YEAR HARBINGER LIMITED WARRANTY

Harbinger provides, to the original purchaser, a two (2) year limited 
warranty on materials and workmanship on all Harbinger mixers from the 
date of purchase. 

For warranty support, please visit our website at 

www.Harbinger 

ProAudio.com

, or contact our Support Team at 

888-286-1809

  

for assistance. Harbinger will repair or replace the unit at  
Harbinger’s discretion.

This warranty does not cover service or parts to repair damage caused 
by neglect, abuse, normal wear and tear and cosmetic appearance to the 
chassis not directly attributed to defects in materials or workmanship. Also 
excluded from coverage are damages caused directly or indirectly due to 
any service, repair(s), or modifications of the chassis, which has not been 
authorized or approved by Harbinger. This two (2) year warranty does 
not cover service or parts to repair damage caused by accident, disaster, 
misuse, abuse, negligence, inadequate packing or inadequate shipping 
procedures. 

The sole and exclusive remedy of the foregoing limited warranty shall be 
limited to the repair or replacement of any defective or non-conforming 
component. All warranties including, but not limited to, the express 

warranty and the implied warranties of merchantability and fitness for a 
particular purpose are limited to the two (2) year warranty period. Some 
states do not allow limitation on how long an implied warranty lasts, so the 
above limitation may not apply to you. There are no express warranties 
beyond those stated here. In the event that applicable law does not allow 
the limitation of the duration of the implied warranties to the warranty 
period, then the duration of the implied warranties shall be limited to as 
long as is provided by applicable law. No warranties apply after  
that period. 

Retailer and manufacturer shall not be liable for damages based upon 
inconvenience, loss of use of product, loss of time, interrupted operation 
or commercial loss or any other incidental or consequential damages 
including but not limited to lost profits, downtime, goodwill, damage to 
or replacement of equipment and property, and any costs of recovering, 
reprogramming, or reproducing any program or data stored in 
equipment that is used with Harbinger products. This guarantee gives you 
specific legal rights; you may have other legal rights, which vary from 
state to state.

Harbinger P.O. Box 5111, Thousand Oaks, CA 91359-5111

All trademarks and registered trademarks mentioned herein are 
recognized as the property of their respective holders.

So we may serve you better, please register  on-line at www.HarbingerProAudio.com

FCC STATEMENTS

1.  Caution: Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment.

2.  Note: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generate, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected 

• Consult the dealer or an experienced radio/TV technician for help

Summary of Contents for L1402FX-USB



















Reviews: