1. PULL CHAIN:
2. REVERSE SWITCH:
When the season changes, you may want to change
the direction your fan spins. To switch between
clockwise and counterclockwise rotations, flip the fan
reversal switch.
WARNING:
Wait for fan to stop before reversing the
switch.
A. In cooler weather, clockwise rotation creates an
upward airflow, which moves hot air from the
ceiling into the room. Push the switch UP.
B. In warmer weather, counterclockwise rotation
creates a downward airflow, which cools the air.
Push the switch DOWN.
• The fan pull chain is for motor speed control:
High, Medium, Low and Off. Pull chain once for
each position.
•
The light pull chain controls the light fixture either
ON or OFF with each pull of the chain.
OPERATING INSTRUCTIONS
Fan pull chain
Light pull chain
Reverse
switch
icon
Sun icon
12. Align two screws in the switch cover with the
keyholes in the switch box on the bottom of the
motor housing assembly (E). Push up to engage
the keyholes in the switch box, then twist to lock in
place. Immediately tighten the two screws firmly,
then re-install the remaining screw previously
removed to fully secure the switch cover to the
bottom of the motor housing assembly (E).
FINAL INSTALLATION
H
B
FF
1
H
B
FF
2
3
13. Attach fan pull chain extension (BB).
Assembly is now complete.
Light Pull Chain Extension
x
BB
CC
1
x
1
Fan Pull Chain Extension
Screw
Switch cover
(special order)
Screw
Switch cover
(special order)
E
BB
E
Hardware Used
15
14
11.
To install the fan WITHOUT the light kit (H)
, you
must special order a switch cover from our customer
service department at 1-866-473-4537, 8 a.m. - 7 p.m.,
EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday.
Loosen two preassembled screws from switch cover.
Remove and save remaining preassembled screw.
Lowes.com/harborbreeze
Lowes.com/harborbreeze
