LIGHT FITTER ASSEMBLY INSTALLATION
(Continued)
14
PULL CHAIN OPERATING INSTRUCTIONS
1.
Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
(Fig. 1)
1
ON
ON
ON
ON
ON
ON
ON
ON
6. Securely attach glass (L) by twisting clockwise
onto the socket plate assembly (K). Don’t
overtighten or force it. (Fig. 6)
6
L
5.
Install bulb (J). (Fig. 5)
5
J
CAUTION
Bulb is pressurized and may shatter. DO
NOT TOUCH BULB WITH BARE HANDS.
Fingerprints may result in shorter bulb life.
Remove fingerprints with alcohol prior to
use.
To reduce the risk of fire, use 100-watt max.
type T4-minican JD E11 tungsten halogen
bulb. Turn off the wall switch and allow the
bulb to cool for 10 minutes before
relamping.
