11
FINAL INSTALLATION
4. Remove the 10 preassembled motor screws (M) from
the underside of the motor (C). Insert two motor screws
(M) in each blade arm (G) and install the blade arm (G)
to the underside of the motor (C) with motor screws (M).
Tighten with Phillips screwdriver.
Repeat for each blade arm (G).
5. Install the bulb (J) into the socket of the light kit (E).
Then, loosen the thumbscrews (L) on the light kit (E).
Lift glass globe (I) to light kit (E), tightening loosened
thumbscrews (L) to secure.
6. Attach the pull chain extensions (CC) or custom pull chain
extensions (not included) to the fan and light pull chains.
Note:
When facing the reverse switch, the pull chain for
the fan is on the right and the pull chain for the light is
on the left.
Hardware Used
CC
Pull Chain
Extension
x 2
4
G
M
C
5
I
L
J
E
H
arbor Breez
e
H
arbor Breez
e
6
Reverse
Switch
H
arbor Breez
e
H
arbor Breez
e
CC