background image

14

LIMITED LIFETIME WARRANTY

Model Name:

 

Elmhurst Ceiling Fan

Model No: 42224 - White

To obtain service, please contact the Service Department:

1-877-706-3267, 8 a.m. - 5 p.m. Central, Monday - Friday.

Set forth below, the manufacturer, Hong Kong China Electric appliance Company (HKC) warrants the fan 

motor for this ceiling fan to be free from defects in workmanship and material for the life of the product. 

Also, subject to the limitations below, HKC warrants all ceiling fan parts (“ceiling fan parts” excludes the 

motor and parts made in whole or in part with glass) to be free from defects in workmanship and material 

for a period of one year after the date of purchase by the original purchaser at retail.  

All claims must be made by the original purchaser, whether such purchaser purchased the product through a 

store or contractor. Ceiling fan part defects must be reported within the first year from the date of purchase. 

Parts made in whole or in part with glass and the finishes of metal and other surfaces are not warranted. 

Purchasers are responsible for all costs of removing and reinstalling the product. Any damage to any 

part caused by ordinary wear and tear, accident, misuse, or improper installation, is not covered by this 

warranty. HKC assumes no responsibility whatsoever for fan installation. Any service performed by a non-

licensed electrician will render the warranty invalid.

HKC’s sole responsibility shall be to repair or replace the motor, parts, or product within the terms stated 

above. HKC shall not be liable for any loss or damage of any kind, including any incidental or consequential 

damages resulting directly or indirectly, from any breach of warranty, express or implied, or any other 

failure of this product. Some states do not allow the exclusion or limitation of incidental or consequential 

damages so this limitation may not apply to you.

If the original purchaser ceases to own the fan, this warranty is voided. 

Should the purchaser encounter a problem with your fan related to defects in workmanship or materials 

within the warranty period associated with the defective part, HKC agrees to replace the defective part 

without charge, or at its option, to replace the ceiling fan with a comparable or superior model.

HKC’s warranties are limited to the written warranties set out in this HKC ceiling fan limited lifetime 

warranty.  All other express and implied warranties, including, without limitation, the implied warranty of 

fitness for a particular purpose and the implied warranty of merchantability are disclaimed. Some states do 

not allow the disclaimer of implied warranties, so this disclaimer may not apply to you.

Summary of Contents for 2599769















Reviews: