D
6
ASSEMBLY INSTRUCTIONS
1
3
2. Remove the mounting bracket by removing the two
mounting bracket screws from the round holes in the
canopy. Then loosen the other two mounting bracket
screws from the J-shaped slots. Retain the mounting
bracket screws for later.
3. Install the mounting bracket to the outlet box (not
included) using the screws and washers provided with
the outlet box.
WARNING:
To reduce the risk of fire, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
Angled Ceiling Mount
Downrod Mount
Mounting Bracket Screw
2
3
4
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER:
Failure to disconnect the power supply prior to
installation may result in serious injury or death.
4. Remove the six motor screws from the underside of
the motor assembly and save for blade arm installation.
Motor Screw
Motor Assembly
