FINAL INSTALLATION
Remove socket ring (L) from each socket. Use
one socket ring (L) to attach each glass shade
(F). (Fig. 7)
Note:
Do not overtighten socket rings as glass
may crack or break
.
Install three candelabra-base 60-watt max. bulbs
(I) included. (Fig. 8)
Important:
When you need to replace bulbs,
please allow bulbs and glass shades to cool
down before handling them.
13
6
Switch
Housing
Plate
Pull Chain
Slot
E
Gently push wires and molex connections into
switch housing plate. Align fan pull chain slot with
fan pull chain and attach light kit fitter (E) to fan
with switch housing plate screws (R) that were
removed in the previous step. Use a Phillips
screwdriver (not included) to secure all three
switch housing plate screws (R). (Fig. 6)
R
6.
7.
8.
F
L
7
F
I
8
