9
WIRING
WARNING:
To reduce the risk of fire, electrical shock or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires
from the fan . If your house wire is larger than 12-gauge and/or there is more than one house wire to
connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use .
CAUTION:
Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present .
1 .
Connect supply and fan wires according to the
diagram and these steps:
• Connect the Green wire from the mounting bracket
(A) to the Bare/Green (ground) supply wire .
• Connect the White wire from the fan to the White
(neutral) supply wire .
• Connect the Black wire from the fan to the Black
(hot) supply wire .
Secure all wiring connections together with wire
connectors (AA) .
Note:
The Black wire is hot power for the fan . The
White wire is neautral for the fan and light kit . The
Green wire is the ground wire . If supply wires are
different colors than referred to above, a professional
electrician should determine the proper wiring .
Hardware Used
AA
Wire Connector
x 3
White (neutral)
Black
Black (hot)
White
2 .
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire .
3 .
Turn the spliced/taped wires upward and gently push
the wires and wire connectors (AA) into the outlet box .
WARNING:
Ensure no wire strands are visible
after making connections . Place the Green and White
wire connections on the opposite side of the outlet
box from the Black .
1
3
AA
AA
2
A
AA
Bare/Green
(Ground)
