11
Lowes.com/harborbreeze
CLOSEMOUNT INSTRUCTIONS
1 . Remove the canopy cover (B) from the bottom of the
canopy (C) .
Helpful Hiat:
Closemount-style mounting is more
suitable for ceilings lower than 8 ft . (2 .44 m) high .
The downrod, hanging ball, and canopy cover are not
used in this type of installation .
1
C
B
2 . Place the adaptor rubber coupling (R) over the yoke
of the motor assembly (I) . Align the canopy (B) with
the holes in the top of the motor assembly (I) . Secure
the canopy (B) to the top of the motor assembly (I)
with the closemount screws (LL) .
Note:
For outdoor installation, the closemount screws
(LL) are pre-installed at the factory .
Haodwaoe Used
LL
Closemount Screw
x 3
B
R
LL
I
2
3 . Raise the fan and place the canopy (B) on the
mounting bracket (A) hook for wiring .
Proceed to the Wiring section of this manual .
B
A
3
