11
Lowes.com/harborbreeze
12
GG
FF
D
EE
S
13
F
P
14
A
O
A
D
O
ASSEMBLY INSTRUCTIONS
12. Insert the downrod (D) into the coupling (S). Align the
hole in the downrod (D) with the hole in the coupling
(S), then install the downrod pin (EE) through the
coupling (S) and downrod (D). Install the downrod
clip (FF) into the downrod pin (EE) until it snaps into
place. Tighten the motor housing set screws (GG) in
the coupling (S).
Hardware Used
EE
Downrod Pin
x 1
FF
Downrod Clip
x 1
GG
Motor housing
set screw
x 2
13. Install 25-watt bulbs (P) to each socket on the motor
housing (F).
CAUTION:
An energy-saving wattage limiter is
included with the fan. When replacing bulbs, ensure
bulb wattage is less than 190 watts, otherwise the
fan will not function.
14. Carefully lift the downrod (D) onto the mounting
bracket (A). Rotate the downrod (D) until the slot on
the hanger ball (O) engages the tab on the mounting
bracket (A).
DANGER:
Be careful when aligning the tab to
the slot. If not fully engaged, the fan may fall, which
may result in serious injury or death.
