15
FINAL INSTALLATION
7. Remove socket rings (J) from sockets of the light kit (I).
Lift glass shade (M) onto socket and secure with socket
rings (J).
8. Install the bulbs (L) into the sockets on the light kit (I).
IMPORTANT:
Make sure you allow the bulbs (L) and
light kit (I) to cool before you replace the bulbs.
Proceed to Step 10.
9.
To install the fan without the light kit (I)
, remove the
three switch housing screws (U) from the light kit (I).
Then, attach the switch housing cap (K) to the switch
housing (H) using the switch housing screws (U).
Note:
Align the notch in the switch housing cap (K) with
the reverse switch on the switch housing (H).
8
J
I
M
L
7
K
U
H
9
Notch
Reverse Switch
