background image

4

Lowes.com/harborbreeze

SAFETY INFORMATION

CAUTION: 

•  TURN OFF ELECTRICITY at the main fuse box (or circuit breaker box) before beginning 

installation by removing the fuse (or switching the circuit breaker off). 

•  All fixtures must be mounted to a ceiling fan that is mounted to an outlet box that is supported by 

the building structure.

•  DO NOT use bulbs having a wattage greater than the maximum value stated on the fixture. The 

use of bulbs with higher wattage than specified will increase temperatures and risk of fire.

PREPARATION

Before beginning the assembly of this product, ensure all parts are present. Compare all parts with 

the package contents list and hardware contents list. If any part is missing or damaged, do not 

attempt to assemble the product.

Estimated Assembly Time:

 30 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety 

Glasses, Step Ladder, Wire Cutters and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook

ASSEMBLY INSTRUCTIONS

1.  Turn off the circuit breakers and the wall switch to the 

fan supply line leads.

DANGER

: Failure to disconnect the power supply 

prior to installation may result in serious injury or death.

1

Summary of Contents for 41182









Reviews: