2.
13
Partially insert three blade screws (AA) along
with three fiber blade washers (BB) to attach
one blade arm (G) to a blade (F). Then, tighten
each blade screw (AA), starting with the one in
the middle. Repeat with remaining blades (F).
Blade Screw x 15
Fiber Blade Washer x 15
2
AA
BB
F
G
Hardware Used
AA
BB
1.
FINAL INSTALLATION
1
B
D
L
D
B
Downrod
Option
Closemount
Option
Lift canopy (B) to mounting bracket (C) and
align slotted holes in canopy (B) with loosened
canopy mounting screws (L) in mounting
bracket (C). Twist canopy (B) to lock, then
insert the two canopy mounting screws (L) and
star washers (O) previously removed (Step 4a,
page 7). Tighten all canopy mounting screws
(L) securely.
U
L
U
Locate motor screws (I) and lock washers (K)
that were previously removed (Step 5, page 7).
Insert two motor screws (I) along with lock
washers (K) through one blade arm (G) to
attach blade arm (G) to motor housing (D).
Tighten motor screws (I) securely. Repeat with
remaining blade arms (G), making sure to
completely secure each blade arm (G) before
proceeding with the next.
3.
F
G
3
D
I
K
