5.
6.
7
Remove motor screws (N) and 5.4 mm lock
washers (O) from underside of motor and save for
blade arm (J) attachment later on. [If there are
plastic motor blocks installed with the motor
screws (N) and 5.4 mm lock washers (O), discard
the plastic motor blocks.]
4.
To ensure the safety of the installation and to
prevent the motor assembly (C) from becoming or
coming loose, use the plastic lock tab (L). Slide
plastic lock tab (L) under bracket tabs so that it
will snap into place.
IMPORTANT: Keep in mind that it will require
some force to fully insert the plastic lock tab
(L) so that it does not move or come out once
in the correct position.
INITIAL INSTALLATION
4
6
Lowes.com/harborbreeze
C
5
L
O
N
Motor
Install ball end of motor assembly (C) into
mounting bracket (A) opening. Align slot in ball
with tab in mounting bracket (A).
DANGER:
Failure to align slot in ball with tab
in mounting bracket (A) may result in serious
injury or death.
Tab
Bracket
Tab
A
Ball
Slot
C
