8
Loop
Wood
Joist
Wood Screw
and Washer
8
Q
M
Find a secure attachment point (wood ceiling joist
highly recommended) and secure safety cable
(M). It will be necessary to use a heavy duty
wood screw, washer and lock washer (sold
separately) with the safety cable (M) loop. (Fig. 8)
8.
B
WIRING
Choose wiring diagram (Fig. 1A, Fig. 1B or Fig. 1C)
that fits your situation and make appropriate wiring
connections as follows: [
NOTE:
For each wire
connection below, and on the following page, use one
of the wire connectors (CC) provided, making sure to
screw wire connector (CC) on in a clockwise
direction.]
1A.
FAN AND LIGHT CONTROLLED BY PULL
CHAINS:
Connect
BLACK
and
BLUE
wire from fan
to
BLACK
wire from ceiling. Connect
WHITE
wire
from fan to
WHITE
wire from ceiling. Connect
GROUND
(
GREEN
) wire from mounting bracket to
BARE
/
GREEN
wire from ceiling. (Fig. 1A)
1.
FAN AND LIGHT CONTROLLED BY PULL CHAINS
BLACK
WHITE
GROUND/GREEN (BARE)
WHITE
BLUE
WHITE
FROM FAN
120 V Power
FROM
CEILING
FAN
BLACK
1A
GREEN
WARNING:
To reduce the risk of fire, electrical
shock, or personal injury, wire connectors provided
with this fan are designed to accept only one 12 gauge
house wire and two lead wires from the fan. If your
house wire is larger than 12 gauge or there is more
than one house wire to connect to the two fan lead
wires, consult an electrician for the proper size wire
connectors to use.
CAUTION:
Be sure outlet box is properly grounded
and that a ground (green or bare) wire is present.
WARNING:
If house wires are different colors
than referred to in the following steps, stop
immediately. A professional electrician is
recommended to determine wiring.
INITIAL INSTALLATION
D
