11
10
WIRING
FINAL INSTALLATION
FINAL INSTALLATION
2
1
Lowes.com/harborbreeze
Lowes.com/harborbreeze
2
3
4
Lowes.com/harborbreeze
Lowes.com/harborbreeze
1. Connect the
BLACK
and
BLUE
wires from fan to
the house
BLACK
wire. Connect the
WHITE
wire
from fan to the house
WHITE
wire. Connect all
GROUNDED (GREEN)
wires together from fan to
the house
GREEN/GROUNDED
wire.
Note:
Black wire is hot power for fan. Blue wire is
hot power for light kit. White wire is common for fan
and light kit. Green wire is grounded wire. lf house
wires are different colors than referred to above,
stop immediately. It is recommended a professional
electrician to determine proper wiring.
2. To connect wires, twist wire ends together and
screw wire with wire connectors (AA) on in a
clockwise direction. Tape the wire connectors (AA) and
wires together. The wires should be spread apart with
the grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side of the outlet
box. Be sure no bare wire or wire strands are visible
after making connection. Place green and white
connections on opposite side of box from the black
and blue connections. The splices should be turned
upward and pushed carefully up into the outlet box.
If you installed the fan with “Closemount Style Fan Mounting”, continue to Steps 1~2. If you
installed the fan with “Downrod Style Fan Mounting”, skip to Step 3.
1. Remove the fan from the hook on the mounting bracket
(A). Align the locking slots of the canopy (B) with the two
screws in the mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place. Immediately
2. Install the two screws that were removed in previous step
and tighten securely.
You may now proceed to the Step 4.
3. Directly align the locking slots of the canopy (B) with the
two screws in the mounting bracket (A). Push up to
engage the slots and turn clockwise to lock in place.
screws that were removed in previous step and tighten
securely.
4. Attach a blade (F) to a blade bracket (E) using the blade
screw (DD).
1
Grounded/Green
Black
White
Grounded/
Green
Black
Blue
White
outlet box
blue black white green
white
GREEN/
black
Supply circuit
speed
switch
GROUNDED
AA
outlet
box
screws
hook
locking
slots
A
B
B
B
DD
screw
screw
outlet box
outlet box
Hardware Used
Blade Screw ×16
E
F
DD
Hardware Used
AA
Wire Connector
x 4
