11
WARNING:
To reduce the risk of fire, electrical shock
or personal injury, wire connectors provided with this fan
are designed to accept only one 12-gauge house wire and
two lead wires from the fan. If your house wire is larger
than 12-gauge or there is more than one house wire to
connect to the corresponding fan lead wires, consult an
electrician for the proper size wire connectors to use.
CAUTION:
Be sure outlet box is properly grounded and
that a ground (green or bare) wire is present.
WARNING:
If house wires are different colors than
referred to in the following steps, stop immediately. A
professional electrician is recommended to determine
wiring.
WARNING:
Using a full range dimmer switch (not
included) to control fan speed will cause a loud humming
noise from fan. To reduce the risk of fire or electrical shock,
do NOT use a full range dimmer switch to control fan
speed.
WIRING
Wire
Connectors
IMPORTANT:
Make the necessary wiring connections for
remote control operation as detailed in Step 1 below. For
each wire connection, use one of the wire connectors from
the remote pack (G), making sure to screw wire connector
on in a clockwise direction.
G
Connect all GROUND (GREEN) wires from fan (on
downrod (C) and mounting bracket (A)) and remote
control receiver (P) to BARE/GREEN supply wire
from ceiling.
Connect BLACK wire (labeled AC IN L) from
remote control receiver (P) to BLACK supply wire
from ceiling.
Connect WHITE wire (labeled AC IN N) from remote
control receiver (P) to WHITE supply wire from
ceiling.
Connect RED wire (labeled TO MOTOR) from
remote control receiver (P) to RED wire from motor
housing (I).
Connect GRAY wire (labeled TO MOTOR) from
remote control receiver (P) to GRAY wire from
motor housing (I).
Connect PINK wire (labeled TO MOTOR) from
remote control receiver (P) to PINK wire from motor
housing (I).
Connect BLUE wire (labeled FOR LIGHT L) from
remote control receiver (P) to BLUE wire from motor
housing (I).
Connect WHITE wire (labeled FOR LIGHT N)
from remote control receiver (P) to WHITE wire
from motor housing (I).
1.
P
1
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
PINK
RED
RED
GRAY
PINK
WHITE
BLUE
BLUE
WHITE
BLACK
AC IN L
WHITE
AC IN N
WHITE
GROUND (GREEN OR BARE)
GROUND
(GREEN OR BARE)
BLACK
FROM
RECEIVER
FROM
FAN
FROM
RECEIVER
FROM
CEILING
A
GREEN/
GROUND
GRAY
COLOR
C
