14
FINAL INSTALLATION
6. Carefully arrange wiring within the fitter plate (J) to
ensure wires do not get pinched when attaching the
LED light kit (M).
Align slotted holes in LED light kit (M) with
loosened fitter plate screws (L) on fitter plate (J).
Twist LED light kit (M) to lock in place. Re-insert the
previously removed fitter plate screw (L) and
securely tighten all fitter plate screws (L).
J
L
6
M
7. Align slots on shade (N) with protrusions on
underside of fitter plate (J). Turn shade (N)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the shade (N) to make
sure it is completely secured.
7
Slot
Protrusion
N
I
5. Connect WHITE wire from LED light kit (M) to
WHITE wire from motor housing (I). Connect BLUE
wire from LED light kit (M) to BLUE (or BLACK) wire
from motor housing (I). Make sure molex
connections snap together securely.
M
5
WHITE
BLUE (or BLACK)
WHITE
BLUE
J
