7
INITIAL INSTALLATION
1.
Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER:
Failure to disconnect the power supply
prior to installation may result in serious injury or death.
2. Determine the mounting method to use.
Standard Mounting
is best suited for ceilings 8 ft. or
higher. For taller ceilings you may want to use a longer
downrod (not included).
Angle Mounting
is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary to
ensure proper blade clearance.
Important:
If using the angle mount, check to ensure
the ceiling angle is not steeper than 16°.
Flushmount
is not available for this item.
Closemount
is not available for this item.
Standard Mounting
Flushmount
Closemount
Angle Mounting
3. Ensure the blades (T) will be at least 30 in. from any
obstructions. Also check the downrod (A) length to
ensure the blades (T) will be at least 7 ft. above the floor.
7 feet
minimum
30 in.
minimum
1
3
T
A
2
