11
FINAL INSTALLATION INSTRUCTIONS
5. Insert the 9-pin connector from the motor assembly
through the center hole in the switch housing (H).
Attach the switch housing (H) to the mounting plate on
the motor assembly by placing the keyhole slots from
the switch housing (H) onto the two protruding
mounting screws (Q) heads.
6. Adjust the switch housing (H) until the screw heads
are aligned with the keyholes, then re-install the mounting
screw (Q) previously removed on step 4. Tighten all
mounting screws (Q) securely.
4
4. Remove one of the mounting screws (Q) on mounting
plate of motor assembly (F), then loosen the other two.
5
6
Q
Q
Q
H
H
Screws
(loosen only)
(remove)
Keyslots